 |
Step 1: Download the most recent iOS firmware file for your device. Step 2: Change the file extension of the firmware file from .ipsw to .zip and extract it to a folder with whatever zip program you use. Step 3: Inside the folder where you extracted the firmware file to, navigate to the Firmware/all_flash folder. Step 4: Inside the all_flash folder you will see another folder, mine is called "all_flash.n90ap.production" yours may have a slightly different name depending on what device/firmware you are using. Step 5: Inside this folder, you will see a file named "applelogo.xxx.img3" the "xxx" part will vary again depending on your device and firmware. Copy this file so that you have the original file and a copy like you see in the image below. Step 6: Now that you have the original applelogo file and the copy, you want to find the file that's called "LLB.n90ap.RELEASE.img3" (once again, the sequence of letters and numbers after the LLB part will vary for each firmware and device). Once you have located the file, go into rename mode and copy the whole filename with the extension. Now that the filename is copied you can delete the LLB file. Step 7: Now rename the COPY of the applelogo file and paste the LLB filename. You should now have two exact copies of the applelogo file with 2 different filenames. Step 8: Next you want to zip the contents of the folder back up and change the extension from .zip back to .ipsw (make sure you zip the contents of the folder and not the <b>...</b> |
From:
knosrocks
Views:
1
 0
ratings |
| Time: 14:34 | More in Howto & Style |
How to put iPhone or iPod DFU mode without a working Home or Power button 7/10/12
Subscribe to Applenews247.Com Newsletter
