 |
Visit Rokform.com to get your Rokshield v3 for iPhone 5 -------------------------------------------------------------------------------------- Install the lanyard on your Rokform Rokshield v3 iPhone 5 case with these simple instructions With your Rokform Rokshield v3 for iPhone5 intact, take the narrow loop end of the lanyard and pinch it between your fingers and pull it through one of the two small holes on the side of the case, then feed it back through the second hole so that the loop is on the outside of the case. Take the thicker end of the lanyard and feed it all the way through the loop you created on the outside of the case. You can put your iPhone 5 in the Rokfshield v3 case at this point. You'll first take off the rubber bumper. The bumper won't come off the case entirely since it is attached by the lanyard. That's ok. Once the bumper is off, you can unsnap the case using the quick-release tab. Slide your iPhone 5 through the top portion of the case, attach the bottom of the case until you hear a snap, and put the bumper back on. That's it! ------------------------------------------------------------------------------------------ www.Rokform.com ------------------------------------------------------------------------------------------ Check us out on Facebook: www.Facebook.com Follow us on Twitter: Twitter.com Read our blog: RokformBlog.com ------------------------------------------------------------------------- www.Rokform.com <b>...</b> |
From:
RokformTech
Views:
0
 0
ratings |
| Time: 02:17 | More in Science & Technology |
Rokshield v3 for iPhone 5 Lanyard Installation | Rokform.com
Subscribe to Applenews247.Com Newsletter
