 |
1.program your GEVEY using the correct IMSI, ICCID, GID1 and DELAY A.IMSI -- You need to program it using the IMSI of the original network where you iPhone is locked. It is a good idea to read IMSI, ICCID and GID1 from your original simcard ( if you have that ) and use this settings; B.ICCID -- if our application recommends that you use ICCID for your phone then please edit your ICCID to match the recommendations; If ICCID is not required then please READ the ICCID from the simcard you are planning to use with GEVEY ( NOT the original simcard, YOUR SIMCARD ) and use that IMSI; NEW !! If the IMSI is not required you can replace the first 2 characters of IMSI with 00 so that our GEVEY will know that you won't want to use an IMSI while unlocking ! C.GID1 -- only few phones are required to have a valid GID1 value. Only use GID settings that our application recommends that or readed from an original simcard; D.DELAY -- the standard 25 delay should work for the majority of phones, if you get 'Unlock FAIL!' message displayed no matter what you do then it's a good idea to change this to a different value! Don't use a delay bigger than 50 as will probably be too big anyway! 2.insert GEVEY together with your simcard in a powered on phone and wait for about 2 minutes 3.If you see the message 'Unlock DONE!' then press Accept and if required go to Carrier menu to Manually select your network ! 4.If you see the message 'Unlock FAIL !' then you need to take out the simcard and put it <b>...</b> |
From:
sagaraga007
Views:
0
 0
ratings |
| Time: 13:19 | More in Science & Technology |
how to update gevey no cut with gevey dongle
Subscribe to Applenews247.Com Newsletter
